Table of Contents
Advertisement
1
Safety Instructions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity, and voltage levels noted in the 9 Techni-
cal Specifications, page 26.
• Camera is rated for outdoor use and is weatherproof when properly installed. Camera is not
intended for submersion in water. Installation under a sheltered environment is recommended.
• Make sure to disconnect the power cabling before installing the camera. Camera will begin
moving immediately when power cable is connected.
• Periodic cleaning may be required. Use a damp cloth only. Do not use anything other than
water to clean the dome cover, as chemicals such as acetone can permanently damage the
plastic.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of intense light.
• Make sure to secure the camera during installation by connecting the included safety chain.
• Mount the camera in an area that is visible but out of reach.
• Make sure to install the camera in a location that can support the combined weight of the
camera and wall mount (weight: 11.7lb/5.3kg).
• Make sure there are no live electrical cables in the area where you plan to mount the camera.
• Ensure that the camera wiring is not exposed or easily cut.
• Use only the supplied regulated power supply. Use of a non-regulated, non-conforming power
supply can damage this product and voids the warranty.
• Ensure you adhere to local building codes.
• Do not hold the camera from the cable. Hold the camera from the edge of the dome cover
#LX400116; r. 4.0/60127/60127; en-US
1
Advertisement
Table of Contents
