Resetting The Camera - Lorex LNZ32P12 series Instruction Manual

10

Resetting the Camera

The camera features a hard reset button that is used to reset all camera set-
tings back to the default values. This is useful in case you want to revert cam-
era image settings back to the default values.
To reset the camera:
1. Connect the camera as detailed in 3 Connecting the Camera. Make sure
the camera is powered on.
2. Use the included Allen key to loosen the dome cover screws (x3). Remove
the dome cover.
3. Use a Phillips screwdriver (not included) to remove the camera module
cover screws (x2). Lift the black camera module cover off of the camera.
4. Press and hold the reset button below the camera module for at least 10
seconds to reset the camera to default settings.
#LX400020; r.41770/42005; en-US
30