Resetting The Camera - Lorex LNZ32P12 Instruction Manual

8

Resetting the Camera

The camera features a hard reset button that is used to reset all camera settings back to
their default values. This is useful in case you want to revert camera image settings back
to their default values.
To reset the camera:
1. Connect the camera as detailed in 3 Connecting the Camera. Make sure the camera is
powered on.
2. Use the included Allen key to loosen the dome cover screws (x3). Remove the dome
cover.
3. Use a Phillips screwdriver (not included) to remove the camera module cover screws
(x2). Lift the black camera module cover off of the camera.
4. Press and hold the reset button below the camera module for at least 10 seconds to
reset the camera to default settings.
#LX400020; r.35429/35429; en-US
20