Edid Management - Kindermann MultiSwitch 21 HDBT Mounting Instructions

7. EDID Management

Select the EDID settings using the DIP switch
The following modes and presets are available:
0000
Learn the display EDID; read the EDID of the connected device on
HDMI loop out (transmitter) and HDMI out (receiver), and use the
EDID with the lower resolution. If no EDID information available,
use the default settings 1920x1080@60Hz 8bit Stereo.
0001
1920x1080@60Hz 8bit High Definition Audio
0010
3840x2160@60Hz Deep Color Stereo Audio
0011 3840x2160@30Hz 8bit Stereo Audio
0100
3840x2160@30Hz Deep Color High Definition Audio
0101
3840x2160@60Hz 4:2:0 Deep Color Stereo Audio
0110 3840x2160@60Hz Deep Color High Definition Audio
0111 3840x2160@60Hz Deep Color HDR LPCM 6CH
1011
Custom EDID1 (User defined 1)
1100 Custom EDID2 (User defined 2)
1101 Custom EDID3 (User defined 3)
1110
Custom EDID4 (User defined 4)
1111
EDID management (Must be chosen, if you intend to select the
EDID via RS232 or WebUI).
In chapter 8.2.1 and 9. we explain two ways to upload custom EDID
information.
32
at the transmitter.
5
EN