Receiver Panel Description - Kindermann MultiSwitch 21 HDBT Mounting Instructions

5. Receiver panel description

Front panel
No. Name
OUTPUT
1
DEVICES
2
Rear panel
No. Name
ETHERNET 1 x RJ45, network passthrough to/from transmitter
1
HDBT IN
2
RS232
3
Power LED 1 x green LED, always on when the device is powered
4
DC 24V
5
30
1
Description
> 1 x HDMI output
> 1 x 5-pin balanced audio output of de-embedded audio
signal
3 x USB-A 2.0, 1 x USB-C, connect keyboard, mouse,
microphone, printer, camera and other equipment
1 2
Description
1 x HDBT input, yellow LED is constantly on when TX and
RX are connected. Green LED is always on when the signal
is with HDCP, flashes when the input signal is without HDCP
Passthrough from transmitter to control any external
device
Power input (alternatively to the transmitter)
2
3 4 5
EN