Kindermann MultiSwitch 21 HDBT Mounting Instructions page 21

Befehl
DS[xx]ON.
DS[xx]OFF.
STA_IN.
@OUT[xx].
$OUT[xx].
GETGUIIP.
SetGuiIP_
DHCPON.
SetGuiIP_
DHCPOFF:xxx.
xxx.x.xxx.
EDIDUpgrade
[xx].
DE
Beschreibung
Switch on DOWNSCALING
the HDMI output signal to
1080p.
[xx] = 00 - 02, 00 means
all output
Switch off DOWNSCALING
the HDMI output signal.
[xx] = 00 - 02, 00 means
all output
Source connection status
Switch the 5V of the HDMI
output ON.
[xx] = 00 or 01, 00 means all
outputs.
Switch the 5V of the HDMI
output OFF.
[xx] = 00 or 01, 00 means all
outputs.
Query IP address of WebUI
Set IP settings to DHCP
Set a fixed IP (default is
192.168.0.178)
You can upload custom
EDID data using RS232.
[xx] = U1 - U4, which are
user-defined EDID settings.
Only one EDID can be
uploaded at a time. After
receiving the command,
the RS232 tool will ask to
upload the EDID file. The
file format must be *.bin
and upload must be started
within 10s.
Please note: In order
to ensure a firm data
reception, HDBaseT must
be disconnected!
Uploading the EDID doesn't
change the EDID settings.
Beispiel für die Rückmeldung
HDMI OUT 01 Down Scale ON!
HDMI OUT 02 Down Scale ON!
HDMI OUT 01 Down Scale OFF!
HDMI OUT 02 Down Scale OFF!
IN 1 2
LINK N N
Set Output Black Screen ON!
Set Output Black Screen OFF!
GUI_IP:192.168.0.173!
GUI IP DHCP ON!
GUI IP DHCP OFF!
SETGUIIP:192.168.0.123!
Input XX/User Define EDID Upgrade OK
By RS232 Or GUI!
21