Rs232 Und Tcp/Ip Steuerprotokoll - Kindermann MultiSwitch 21 HDBT Mounting Instructions

9. RS232 und TCP/IP Steuerprotokoll

Baud rate: 9600
Zur Steuerung per TCP/IP nutzen Sie den Port:
Befehl
PHDBTON.
PHDBTOFF.
HDMIA.
HDMIM.
HDMI[x].
POWON.
POWOFF.
SIGNALTRG
[x]MODE.
SIGNALTRGSTA. Query the method of signal
RST.
Lock.
Unlock.
STA.
18
Data bit: 8
Beschreibung
HDBaseT OUT PoC power ON
HDBaseT OUT PoC power OFF
Auto-switch mode ON
Manual-switch mode ON
HDMI input source
selection.
x = 1 & 2
1 – Type-C
2 – HDMI
Turn off standby mode
Turn on standby mode
Set the signal detection
mode to 1 = 5V detection or
2 = TMDS detection.
detection (TMDS or 5V)
Factory restet
Activate front panel lock
Deactivate front panel lock
Query status
Stop bit: 1 Parity bit: none
4001
Beispiel für die Rückmeldung
HDBT 01 Power ON!
HDBT 01 Power OFF!
HDMI Out Switch Auto Mode!
HDMI Out Switch Manual Mode!
HDMI Out Switch To 01!
HDMI Out Switch To 02!
Power ON!
Power OFF!
Set Trigger Mode To 5V
Set Trigger Mode To TMDS
Get Trigger Mode Is 5V
Get Trigger Mode Is TMDS
Factory Default!
System Locked!
System UnLock!
MultiSwitch 21 HDBT
V1.0.0
PWON!
HDBT 01 Power ON!
HDMI OUT 01 Down Scale OFF!
HDMI OUT 02 Down Scale OFF!
HDMI Out Switch Auto Mode!
Get Trigger Mode Is 5V.
System Unlock!
Baudrate 9600!
GUI_IP:192.168.0.200!
HDMI Out Switch To 02!
Set Output Black Screen ON!
IN 1 2
.......
DE