Transmitter Panel Description - Kindermann MultiSwitch 21 HDBT Mounting Instructions

4. Transmitter panel description

Front panel
1 2
No. Name
POWER
1
LED
SELECT
2
DISPLAY
3
BLACK
4
SCREEN
EDID
5
DEVICES
6
ETHERNET 1 x RJ45, network passthrough to/from receiver
7
FW
8
28
3 4
Description
1 x green LED, always on when the device is powered
> 3 x blue indicator LEDs
> Click button to select the input (HDMI or USB-C).
Press and hold for 3 seconds to enter or exit automatic
switching mode, the corresponding LED is on or off.
> 2 x blue indicator LEDs
> Press the button to send DISPLAY ON/OFF command via
CEC and RS232 (see chapter 9) to the connected display
or projector.
The corresponding LED indicator is always on.
> 2 x blue indicator LEDs
> Press the button to switch the output to black.
The corresponding LED is always on.
4-digit DIP switch for EDID management
2 x USB-A 3.0 to connect peripheral devices like keyboard,
mouse, speakerphone, cameras and other equipment
1 x Micro-USB to upgrade the firmware
5 6 7 8
EN