Appendix 2: Installing the Faceplate
NOTE: If the depth and or the opening of the masonry hearth require the use of the optional
projection kit and/or an optional faceplate backing plate kit, follow the instructions included with these
options before beginning the installation of the cast iron faceplate.
1. Remove the steel faceplate already
installed on the insert.
3. Pull gently on the blower switch assembly.
It is very important not to disconnect the
wires.
Destination 2.3 Insert Installation and Operation Manual
2. Put together the steel face plate with
the two parts of the cast iron faceplate.
4. Approach the faceplate and screw the
blower switch assembly on the left
hand side.
43