Advertisement
BASIC OPERATION
1. Power On Switch
To turn the UPS on, press the power button
for approximately 2 seconds - you will hear
a constant tone (1 second) - and release
after a short beep.
To turn the UPS off, press the power button
for approximately 2 seconds - you will hear
a constant tone (1 second) - and release
after two short beeps.
Alarm setting: The audible alarm can be
turned OFF or ON by quickly pressing the
POWER button twice. The default setting
is for the Alarm On. To turn the Alarm Off,
quickly press the power button twice. You
will hear two short beeps when the Alarm
is turned off. To turn the Alarm back ON,
quickly press the power button twice. You
will hear a single short beep when the
Alarm is turned on.
*When the Alarm is turned off, there will
be no audible notification when the UPS
reaches a low battery state.
2. Power On Indicator
This LED is illuminated when the utility
power is normal and the UPS outlets are
providing power, free of surges and spikes.
3. Battery and Surge Protected Outlets
The unit has several battery powered
and surge protected outlets to ensure
temporary uninterrupted operation of your
equipment during a power failure. (DO
NOT plug a laser printer, paper shredder,
copier, space heater, vacuum cleaner, sump
pump, or other large electrical device into
the "Battery and Surge Protected Outlets."
The power demands of these devices will
overload and possibly damage the unit.)
SYSTEM FUNCTION BLOCK DIAGRAM
Input
EMI
Filter
Normal Mode
Battery Mode
Surge
Suppressor
Charger
AC / DC
4. Full-Time Surge Protection Outlets
The unit has several surge suppression
outlets.
5. Circuit Breaker
Located on the side of the UPS, the circuit
breaker serves to provide overload and
fault protection.
6. USB Port to PC
The port allows connection and
communication between the USB port on
the computer and the UPS unit. The UPS
communicates its status to the PowerPanel®
Personal software.
7. Outlets Designed for AC Adapters
The UPS unit has four widely-spaced
outlets, so AC power adapters can be
plugged into the UPS without overlapping
or blocking adjacent outlets.
Battery
Output
Inverter
Advertisement
