Basic Operation - CyberPower OR600ERM1U User Manual

DESCRIPTION
1. LCD Module Display
High resolution and intelligent LCD display shows all the UPS information with icons and
messages. For more information please check the "Definitions for Illuminated LCD Indicators"
section.
2. Power On Indicator
It illuminates when the UPS outlets are providing power, free of surges and spikes.
3. Power Switch
Used as the master on/off switch for equipment connected to the battery power supplied outlets.
4. LCD Display Toggle/Selected Switch
The switch can be used to select the LCD display contents including Input Voltage, Output Voltage
and Estimated Run Time.
5. Battery and Surge Protected Outlets
The unit has four battery powered/surge protected outlets for connected equipment and ensures
temporary uninterrupted operation of your equipment during a power failure.
6. Full-Time Surge Protection Outlets
The unit has two always on surge suppression outlets.
7. Expansion Port
Allows users to add the optional SNMP card.
8. Communication Protection Ports
Communication protection ports will protect any standard modem, fax, telephone line, broadband
network or Ethernet connection.
9. USB Port to PC
The USB port allow communication from the UPS to the computer. The UPS communicates its
status to the PowerPanel
10. Serial Port to PC
The port allows connection and communications from the DB-9 serial on the computer to the UPS
unit.
11. Circuit Breaker
Located on the side of the UPS, the circuit breaker serves to provide overload and fault protection.
12. AC Input
Connect the AC Power cord to a properly wired and grounded outlet.

BASIC OPERATION

®
Business software when connected with a USB port.
2