Table of Contents
Advertisement
No.
Description
DIP switch.
● PD Alive: When terminal device crash is detected, power down and
8
● Extend Mode: Extends the maximum transmission distance to 250 m,
Another DIP switch.
Select Default or Extend Mode by dialing the DIP switch.
(Not included
Extend Mode: Extends the maximum transmission distance to 250 m, but
in the figure)
reduces average transmission speed to 10 Mbps.
Uplink port speed indicator.
Speed
● On: 100 Mbps/1000 Mbps.
(Not included
in the figure)
● Off: 10 Mbps.
Figure 2-1 Front panel (with optical ports)
Following are all the ports and indicators on the front panel of the 8-port unmanaged desktop
switch (with optical ports), and might differ from the actual product.
Table 2-1 Description of front panel (with optical ports)
No.
Description
PoE port status indicator.
1
● On: Powered by PoE.
● Off: Not powered by PoE.
Single-port connection or data transmission status indicator (Link/Act).
● On: Connected to the Switch.
2
● Off: Not connected to the Switch.
● Flashes: Data transmission is in progress.
Uplink port data transmission status indicator (Up1/Up2).
3
● Flashes: Data transmission is in progress.
● Off: No data transmission.
Power indicator.
4
● On: Power on.
● Off: Power off.
Uplink port, 10/100/1000 Mbps self-adaptive electrical ports and 1000
5
Mbps optical ports.
6
10/100 Mbps or 10/100/1000 Mbps self-adaptive Ethernet ports.
restart the terminal device.
but reduces average transmission speed to 10 Mbps.
3
Advertisement
Table of Contents
