Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dahua D-PFS4226-24ET-240
Summary of Contents for Dahua D-PFS4226-24ET-240
- Page 1 PoE Switch (16/24-port Managed Desktop Switch) Quick Start Guide V1.0.0...
-
Page 2: Foreword
Foreword General This manual mainly introduces the hardware, installation, and wiring steps of the 16/24-port managed desktop switch (hereinafter referred to as "the Device"). Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury. - Page 3 ● If there is any uncertainty or controversy, we reserve the right of final explanation.
-
Page 4: Important Safeguards And Warnings
Important Safeguards and Warnings This section introduces content covering the proper handling of the Device, hazard prevention, and prevention of property damage. Read carefully before using the Device, comply with the guidelines when using it, and keep the manual safe for future reference. Operating Requirements ●... - Page 5 ● Connect class I electrical appliances to a power socket with protective earthing. ● Do not block the ventilator of the device with objects, such as newspapers, table clothes or curtains. ● Do not put open flames, such as a lit candle, on the device. ●...
-
Page 6: Table Of Contents
Table of Contents Foreword ........................................I Important Safeguards and Warnings ............................III 1 Overview ........................................1 1.1 Introduction ....................................1 1.2 Features ......................................1 2 Port and Indicator ....................................2 2.1 Front Panel ....................................2 2.2 Rear Panel ...................................... 3 3 Installation ....................................... 4 4 Wiring ......................................... -
Page 7: Overview
1 Overview 1.1 Introduction The Device is a layer-2 commercial switch. It provides a high-performance switching engine and large buffer memory to ensure smooth video stream transmission. With a full-metal design, the Device has great heat dissipation capabilities on its shell surface, and is able to work in environments that range from –10 °C (14 °F) to +55 °C (131 °F). -
Page 8: Port And Indicator
2 Port and Indicator 2.1 Front Panel The following figure is for reference only, and might differ from the actual device. Figure 2-1 Front panel Following are all the ports and indicators on the front panel of the 16/24-port managed desktop switch. -
Page 9: Rear Panel
2.2 Rear Panel The following figure is for reference only, and might differ from the actual device. Figure 2-2 Rear Panel Table 2-2 Description of the rear panel Description Power switch. Power port, supports 100–240 VAC. Ground terminal. -
Page 10: Installation
3 Installation The Device supports rack mount. Step 1 Attach the mounting bracket to the Device side panel (one on each side) and secure it with the screws provided with the rack. Figure 3-1 Install bracket Step 2 Attach the Device to the rack with screws. Figure 3-2 Install device... -
Page 11: Wiring
4 Wiring 4.1 Connecting GND Grounding the Device can protect it against lightning and interference. Step 1 Remove the ground screw from the Device and pass the ground screw through the round hole of the OT terminal of the ground cable. Turn the ground screw clockwise with a cross screwdriver to fasten the OT terminal of the ground cable. -
Page 12: Connecting Sfp Ethernet Port
Figure 4-3 Connect cable 4.4 Connecting SFP Ethernet Port ● When installing the SFP optical module, do not touch the gold finger of the SFP optical module. ● Do not remove the dust plug of the SFP optical module before connecting the optical fiber. ●... -
Page 13: Connecting Poe Ethernet Port
Figure 4-5 Connect optical fiber 4.5 Connecting PoE Ethernet Port If the terminal device has a PoE Ethernet port, you can directly connect this port to the Device PoE Ethernet port through the network cable to achieve synchronized network connection and power supply. -
Page 14: Quick Operation
5 Quick Operation 5.1 Login through Web You can log in to the Device through the web for management and operation. For details, see web operation manual. For first login, you need to change the password according to the interface prompt. Table 5-1 Default factory configuration Parameter Description... -
Page 15: Appendix 1 Cybersecurity Recommendations
Appendix 1 Cybersecurity Recommendations Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is connected to the internet. IP video surveillance is not immune to cyber risks, but taking basic steps toward protecting and strengthening networks and networked appliances will make them less susceptible to attacks. - Page 16 6. Enable HTTPS We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. 7. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the equipment, thus reducing the risk of ARP spoofing.
Need help?
Do you have a question about the D-PFS4226-24ET-240 and is the answer not in the manual?
Questions and answers