Incoming Acceptance And Product Identification; Incoming Acceptance; Product Identification - Endress+Hauser Solitrend MMP60 Operating Instructions Manual

Solitrend MMP60
1 Electronics housing
2 Rectangular sensor with HF cable 2.5 m (8.2 ft)
4

Incoming acceptance and product identification

4.1

Incoming acceptance

Check the following during incoming acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the nameplate data match the ordering information on the delivery note?
 If required (see nameplate): Are the safety instructions (XA) provided?
If one of these conditions is not met, please contact the manufacturer' s sales office.
4.2

Product identification

The device can be identified in the following ways:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
‣
Enter serial number from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer)
 All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
‣
Enter the serial number from the nameplate in the Endress+Hauser Operations app or scan
the 2-D matrix code on the nameplate with the camera
 All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
Endress+Hauser
1
Incoming acceptance and product identification
2
A0046896
7