Operation options
7
Operation options
5
Overview
1
Device
2
Remote display
3
Computer
4
LED display
5
PLC or water dosing computer
8
Commissioning
8.1
Analog outputs for measured value output
The measured values are output as a current signal via the analog output. The device can be
set to 0 to 20 mA or 4 to 20 mA.
The current output can also be set inversely to 20 to 0 mA or 20 to 4 mA for special
controllers and applications.
The analog outputs can be set differently to the following possible options:
Moisture, temperature
• Output 1: moisture in % (variable setting)
• Output 2: material temperature 0 to 100 °C (32 to 212 °F), this also applies for the high-
temperature version.
Moisture, conductivity
• Output 1: moisture in % (variable setting)
• Output 2: conductivity 0 to 20 mS/cm(factory setting)
12
1
RS485
4
5
IMP-Bus
2
3
Solitrend MMP60
A0046920
Endress+Hauser