Incoming Acceptance And Product Identification; Incoming Acceptance; Product Identification; Nameplate - Endress+Hauser Cerabar M PMC51 Brief Operating Instructions

Incoming acceptance and product identification

3 Incoming acceptance and product identification
3.1

Incoming acceptance

• Is the order code on the delivery note (1) identical to the order code on the product sticker
(2)?
• Are the goods undamaged?
• Do the data on the nameplate correspond to the order specifications and the delivery note?
• Is the documentation available?
• If required (see nameplate): Are the safety instructions (XA) present?
If one of these conditions is not fulfilled, please contact your Endress+Hauser sales office.
3.2

Product identification

The following options are available to identify the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter the serial numbers from the nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): all the information about the device is displayed.
For an overview of the technical documentation provided, enter the serial number from the
nameplates in W@M Device Viewer (www.endress.com/deviceviewer)
3.2.1 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
3.3

Nameplate

See operating instructions.
8
DELIVERY NOTE
1 = 2
Cerabar M PMC51, PMP51, PMP55
Endress+Hauser
A0016870