Post-Connection Check - Endress+Hauser Solitrend MMP60 Operating Instructions Manual

Solitrend MMP60
 4 Assignment of the 10-pin plug
A 12 to 24 V stabilized power supply
DC
Wire color: red (RD)
B 0 V power supply
DC
Wire color: blue (BU)
D 1st analog positive (+), material moisture
Wire color: green (GN)
E 1st analog return line (-), material moisture
Wire color: yellow (YE)
F RS485 A (must be enabled)
Wire color: white (WH)
G RS485 B (must be enabled)
Wire color: brown (BN)
C IMP-Bus RT
Wire color: gray (GY) / pink (PK), see figure below
J IMP-Bus COM
Wire color: blue (BU) / red (RD), see figure below
K 2nd analog positive (+)
Wire color: pink (PK)
E 2nd analog return line (-)
Wire color: gray (GY)
H Shield (is grounded at the device. The installation must be grounded correctly!)
Wire color: transparent
6.3

Post-connection check

 Is the device or cable undamaged (visual inspection)?
 Does the supply voltage match the specifications on the nameplate?
 Are the connections established correctly and protected against mechanical influences?
Endress+Hauser
A
H
B
J
G K C
E
F D
Electrical connection
A0037415
11