PERCo ST-02 Manual

ST-02 Speed gate

Application

Operating modes

Main features

perco.com linkedin.com/mwlite/company/perco
ST-02 Speed gate with sliding panels is designed for indoor operation. It is an ideal solution
for sites with high aesthetic and comfort requirements.
ST-02 is available in two versions: a standard passageway width of 600 mm (ST-02.600 version)
or an extended one of 900 mm (ST-02.900). The extended version provides convenient access
for people in wheelchairs and ensures free passage in case of an emergency. The panels are
sliding away when a passage takes place.
If an increased number of passage lanes is needed, STD-02 double-sided sections can be
installed. Each double-sided section allows arranging one extra passage lane. STD-02 is
available in two main versions: STD-02.600 and STD-02.900 for organizing passage lanes
with a width of 600 mm and 900 mm, respectively.
ST-02.600/900 is available on a separate order to arrange
passage lanes of different widths (600 and 900 mm). For the same
purpose, the STD-02.900 double-sided section has the possibility of
reducing one panel to 600 mm.
The tracking system is equipped with two levels of infrared sensors,
which guarantees the safety of passage at high throughput and
provides avoiding the simultaneous passage of two or more people.
The speed gate supports two main operating modes: normally closed and normally open, as
well as an additional "Automatic opening in the selected direction" mode (only in normally
closed mode).
Control commands:
• passage denial,
• authorized single passage in the set direction
•
authorized free passage in the set direction
• authorized free passage in both directions
When the power is off, the sliding panels are unlocked and can be moved away manually.
•
operation of the speed gate from RC-panel, WRC, ACS
• built into the housing electronic boards
•
safe voltage – 24 V
+50
+1
temperature operating
range voltage
2
passage
motor drive
direction
export@perco.com
W
204 W
24V
power consumption
60
persons/min
RC-panel
+7 (812) 247-04-64