Table of Contents
Advertisement
Quick Links
RTD-20 Full height rotor turnstile
Application
Operating modes
perco.com
linkedin.com/mwlite/company/perco
RTD-20 full height double rotor turnstile is a doubled version of RTD-16 full height rotor turnstile
i.e. it features two passage lanes. This turnstile allows saving more than 25% of the passageway
width compared with two RTD-16 turnstiles installed in a row.
Turnstile is available in two versions:
•
RTD-20.1 – with the motor drive of automatic resetting
•
RTD-20.2 – with the mechanical drive of resetting
RTD-20.1S and RTD-20.2S turnstiles are equipped with a stainless steel rotor.
Two RC-panels are included in the standard delivery set, one for each passage zone. Buttons
orientation relative to the passage directions is to be set upon connecting the RC-panel to the
turnstile.
It is recommended to install one turnstile based on a maximum
working load of 20 persons/min. Turnstiles can be equipped with
a matching gate and railings.
Each passage zone provides passage control in two directions, operating mode may be
set independently for each passage direction of both passage zones. Supported operating
modes:
•
passage denial in both directions
•
single passage in one direction and passage denial in the other direction
•
successive single passage in both directions
•
free passage in one direction and passage denial in the other direction
•
free passage in one direction and single passage in the other direction
•
free passage in both directions
•
lock-chamber mode (two-step mode with a pass-through verification, set during
installation)
The product is a normally closed device. When de-energized, the rotor is locked in its home
position.
+55
-40
temperature
operating
range
voltage
2
passage
persons/min
direction
motor drive
RC-panel
export@perco.com
W
210 W
22-30V
power
consumption
40
mechanical
unlocking
+7 (812) 247-04-64
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PERCo RTD-20
Summary of Contents for PERCo RTD-20
- Page 1 Application RTD-20 full height double rotor turnstile is a doubled version of RTD-16 full height rotor turnstile i.e. it features two passage lanes. This turnstile allows saving more than 25% of the passageway width compared with two RTD-16 turnstiles installed in a row.
-
Page 2: Main Features
RTD-20 Full height rotor turnstile Main features • operation of the turnstile from RC-panel, WRC, ACS • built-in control units for each passage zone • lock-chamber mode is available • power and control cables can be routed to the turnstiles through the special cable duct and through the top channel •... -
Page 3: Technical Specifications
RTD-20 Full height rotor turnstile Documentation set: Certificate and Operation manual HDF marking template Spare parts, accessories and hardware kit Optional equipment (upon request) RF20 foundation frame RTC-20 canopy WHD-16 Full height security gate MB-16 full height railing sections required Attaching plates and brackets for coupling turnstiles, railings, security gates, etc. - Page 4 UNLOCK A UNLOCK A BUTTON A RS SOUND RS SOUND COMMON Not included in standard delivery set Wiring diagram to the RTD-20 turnstile Diagram description Item Description RTD-20 turnstile Top channel A3, А4 RC-panel (#1 and #2), WRC (#1 and #2) ACS controllers (#1 and #2) +24V / 5.5A Turnstile power supplies (#1 and #2)
- Page 5 RTD-20 Full height rotor turnstile Walkway downlights power supply (+12 V / 3 A) Walkway downlights Indication blocks of passage directions A and B RA, RB ACS readers 1, 2 Indication cables Passage zones power cables External cable for powering walkway downlights Jumpers for switching "IMP/POT"...
- Page 6 RTD-20 Full height rotor turnstile Sending control signal to the Stop input locks the rotor regardless of the signals at the Unlock A (B) inputs. Potential mode is recommended during operation from the ACS controller. Regardless of the selected control mode, PASS A or PASS B signals are generated when passing in one direction or the other.
-
Page 7: Overall Dimensions
RTD-20 Full height rotor turnstile Overall dimensions Overall dimensions Overall Foundation requirements: concrete (grade 400 or higher), stone or similar foundations dimensions of at least 150 mm thick, when installing the turnstile on a less steady foundation, it is recommended to apply reinforcing elements (500х500х500 mm) or RF-20 foundation frame. - Page 8 RTD-20 Full height rotor turnstile Ø25 cable entry zone Mounting holes symmetry axis ø 2 holes 16x60 Hole marking for cable duct mounting Flanges of RTD-20 guide barrier sections 4 holes ø16x60 Flanges of WHD-16 security gate Hole marking for mounting turnstile and WHD-16 security gate...
- Page 9 RTD-20 Full height rotor turnstile Lock chamber Rotor home position (top view): a - for standard passage mode, – b - for lock-chamber mode Foundation RF-20 foundation frame is designed to raise the mounting quality level which makes the frame turnstile more secure during operation.
-
Page 10: Warranty
RTD-20 Full height rotor turnstile Canopy RTC-20 canopy is designed to be used together with the RTD-20 turnstile and to protect the turnstile from precipitations. Several turnstiles can be installed in a row. Delivery set Left/right half-framework Post with brackets...
Need help?
Do you have a question about the RTD-20 and is the answer not in the manual?
Questions and answers