Table of Contents
Advertisement
fit directly to the wooden struts or otherwise strengthen the wall; do not fix
through plasterboard alone. Additional Brackets are available on request.
2. Use the mounting template printed onto the box to measure the positions for the
Brackets.
Alternatively, if you are fitting the radiator to a stud wall and struggling to line the
Bracket positions up with the studs, it may be useful to choose a custom mounting
position.
a. Choose a distance between the Brackets
specifications.
b. Check that the Brackets
Bracket distances if necessary.
c. Use a tape measure, spirit level and positions decided in a. and b. to mark
the custom drilling positions on the wall.
Figure 2 | Fixing the radiator Brackets
3. Drill the ten required holes in the wall using a 10mm drill bit and push the Wall
Plugs
(B)
inside.
4. Position the Brackets
5. The radiator is now ready to mount. You may choose to add the optional security
Bracket at this stage, see Figure 3.
a. Lift the radiator onto the Brackets.
b. OPTIONAL – Position the remaining Bracket pointing downwards above
one of the top Brackets, such that the radiator top bar is now locked in
place. Mark the Bracket location on the wall before lifting the radiator off
the Brackets.
Ecostrad_Allerton_H_V1.1.1_23062022
(A)
slot between the radiator bars correctly. Adjust
(A)
over the holes and fix in place with the Wall Screws (C).
(A)
that corresponds with your
7
Advertisement
Table of Contents
