Mitsubishi Electric MELSEC iQ-R Reference Manual page 16

Range
The range can be changed according to the co-recording setting for each network module.
For details on the co-recording setting for each network module, refer to the following:
Page 24 Setting for a network module
The following configuration example is used to show the ranges and settings for co-recording.
(It is assumed that the co-recording setting is set to "Use" for all trigger relay devices and recording devices, excluding
network modules.)
■In the same network
The following shows the ranges and settings for co-recording in the same network.
: CC-Link IE TSN network connection
Range
All programmable controller systems
Master station 1 and a programmable controller system on which local station 1 is
mounted
Local station 1 and local station 2
Each programmable controller system only
2 SYSTEM CONFIGURATION
14
2.1 System Configuration
(1)
(2)
(3)
Co-recording setting for each network module
(1) Master (2) Local station
station 1
Use Use
Use Use
Not use Use
Not use Not use
(3) Local station
2
Use
Not use
Use
Not use