Flasher; Sonar Simulator; Stop Chart - Lowrance X52 Installation And Operation Instructions Manual

Flasher

The Flasher page represents a flasher style sonar. A circular dial shows
all returning echoes at a high screen refresh rate. It uses the Grayline
feature to show weaker targets as lighter shades. The bottom depth is
also shown as a black bar across the outer circle.
Bottom signal

Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in
simulator mode, you will see [Simulated] in the Sonar Page title bar. To
use the simulator:
1. From the Sonar Page, press
2. Turn off Sonar Simulator by pressing
|
S ENT
IMULATOR
NOTE:
If you turn on your unit before attaching a transducer, it may enter
a demo mode. The words "demo mode" flash on the bottom of the
screen and a sonar chart plays much like the simulator. Unlike the
simulator, the demo mode is for demonstration only, and will
automatically stop as soon as you turn on the unit with a
transducer attached. The simulator will continue to function
normally.

Stop Chart

If you are running multiple units on a boat, there are times when you
may want to turn off the sonar. This command turns off the sonar and
| .
EXIT
Flasher page.
|
MENU MENU
66
Surface clutter
Fish signal,
approximately
13 feet
|↓ to
S S
ONAR IMULATOR
|
MENU MENU
| .
ENT
|↓ to
S
ONAR