Surface Clarity - Lowrance X52 Installation And Operation Instructions Manual

stops the chart from scrolling. Sonar restarts automatically each time
you turn on your unit.
Press |↓ to | | .
MENU S C ENT EXIT
TOP HART
To turn on sonar and start the chart scrolling again, repeat the above step.
Sonar Menu with Stop Chart command selected. The box is unchecked,
indicating that the chart is scrolling across the screen.

Surface Clarity

The markings extending downward from the zero line on the chart are
called "surface clutter." These markings are caused by wave action,
boat wakes, temperature inversion and more.
The surface clarity control reduces or eliminates surface clutter signals
from the display. It does this by changing the sensitivity of the receiver,
decreasing it near the surface and gradually increasing it as the depth
increases.
There are three levels of surface clarity available: low, medium, or high.
It can also be turned off. The default level is off.
To adjust the Surface Clarity level:
1. From the Sonar Page, press |↓ to | | .
MENU S F ENT ENT
ONAR EATURES
67