Lowrance X52 Installation And Operation Instructions Manual page 32

Before positioning the bracket, be sure to hold the cables against the
rear edge of the hole. Then, slide the bracket over the hole and butt the
rear of the bracket base firmly against the cables, thus pinning them in
place against the side of the hole. Finally, fasten the bracket to the
dash. Attach the unit to the gimbal bracket using the supplied gimbal
knobs and washers.
In-Dash Installation
You can mount the unit in the dash with an optional FM-4 In-Dash
Adapter Kit. The kit includes mounting hardware, a template for
cutting the hole and an instruction sheet, part 988-0147-44.
47
[1.85]
Hole
diameter
3.5
[0.14]
R 6.35
[0.25]
In-dash mounting template for X52 and X59DF sonars, showing
dimensions. NOTE: The figure above is not printed to scale. A scaled
template is available for free download from our web site,
Portable Installation
Like many Lowrance products, this sonar unit is capable of portable
operation by using an optional portable power pack. The power pack
and an optional portable transducer expand the uses for your sonar
unit. The power pack makes it easy to use the unit on your boat or take
In-Dash
Template
Millimeters
Cut on line
ALWAYS VERIFY DIMENSIONS
www.lowrance.com.
121
[4.76]
Top
[Inches]
119
[4.68]
28
112
[4.40]