Depth Range - Upper And Lower Limits; To Change The Upper And Lower Limits - Lowrance X52 Installation And Operation Instructions Manual

Depth Range - Upper and Lower Limits

Virtually any segment of the water column can be displayed by using
the upper and lower limit feature. This lets you pick the shallow and
deep depth range limits that are shown on the screen, provided there is
at least 5 feet between the upper and lower limit you select. For
example, a range from 12 feet to 34 feet could be used.
Changing the upper and lower limits gives you far greater control over
the depth range. This feature lets you "zoom in" the display in almost
unlimited combinations. Nearly any segment of the water column, from
the surface to the bottom can be shown. This enlarges the sonar targets
to best suit your fishing needs and water conditions.
Sonar Chart Limits menu, with Upper Limit selected.

To change the upper and lower limits:

1. From the Sonar Page, press
The Sonar Chart Limits menu appears, with Upper Limit selected.
2. To set the upper limit, press
correct, then press
Area "zoomed"
Normal display, in auto depth range mode, left. At right, display
"zoomed" with Upper and Lower Limits focusing on the portion
of the water column from 10 feet to 20 feet deep.
MENU
.
EXIT
|↓ to
U
PPER
. Press ↑ or ↓ until the depth is
ENT
51
A L L
ND OWER IMITS
| .
ENT