Ping Speed & Hyperscroll - Lowrance X52 Installation And Operation Instructions Manual

3. To return to the previous page, press
To change displayed data font size:
1. Press
MENU
2. Press ↓ or ↑ to select Data Type, then press
(displayed in the bottom of the Overlay Data Shown window) cycles
through available sizes. Keep pressing
Data Size , then press EXIT
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, press
beginning with step two above.)
3. To return to the previous page, press
Tip:
If you wish, you can change the displayed data font size when you
select a data type:
1. Press
MENU
2. Press ↓ or ↑ to select Data Type|press
desired font size is shown.
The data will be shown in the new font size. To return to the
previous page, press
Sonar chart with Overlay Data turned on. This example shows
Depth, Water Temperature and the Water Speed of the boat.
Ping Speed & HyperScroll
Ping Speed controls the rate at which the transmitter and transducer
broadcast sonar sound waves — pings — into the water. The unit has a
default ping speed of 50 percent. At normal boating speeds, this
automatically provides enough return echoes to refresh the screen and
scroll the chart at maximum chart speed.
|↓ to
O
VERLAY
.
|↓ to
O
VERLAY
EXIT
EXIT
| .
D ENT
ATA
ENT
EXIT
| .
D ENT
ATA
| .
EXIT
56
| .
EXIT
ENT
until it shows the desired
and repeat these steps,
ENT
.
. repeatedly until the
ENT
. The
D S
ATA IZE