Depth Range - Upper And Lower Limits - Lowrance X67C Installation And Operation Instructions Manual

NOTE:
The sonar's depth capability depends on the transducer installa-
tion, water and bottom conditions, and other factors.

Depth Range - Upper and Lower Limits

Virtually any segment of the water column can be displayed by using
the upper and lower limit feature. This lets you pick the shallow and
deep depth range limits that are shown on the screen, provided there is
at least 5 feet between the upper and lower limit you select. For exam-
ple, a range from 12 feet to 34 feet could be used.
Changing the upper and lower limits gives you far greater control over
the depth range. This feature lets you "zoom in" the display in almost
unlimited combinations. Nearly any segment of the water column, from
the surface to the bottom can be shown. This enlarges the sonar targets
to best suit your fishing needs and water conditions.
At left, Sonar Page Menu with Upper and Lower Limits command se-
lected. At right, Sonar Chart Limits menu, with Upper Limit selected.
To change the upper and lower limits:
1. From the Sonar Page, press
The Sonar Chart Limits menu appears, with Upper Limit selected.
2. To set the upper limit, press
rect, then press
3. To set the lower limit, press ↓ to
the depth is correct, then press
.
EXIT
|↓ to
MENU U
. Press ↑ or ↓ until the depth is cor-
ENT
L L
OWER IMIT
| |
EXIT EXIT EXIT
47
A L
PPER ND OWER
. Press ↑ or ↓ until
|
ENT
.
| .
L ENT
IMITS