Pl-485-Bt Connection - Prolon NC2000 Quick Start Manual

How to Connect a Computer to Prolon Controllers

PL-485-BT Connection

To Controllers
PL-NC2000 (Network Controller)
Use this method to connect to a PL-NC2000 using the PL-485-BT
converter. NOTE: USB Cable (Type A to Type B) and CAT5e cable are
provided with PL-485-BT converter.
IMPORTANT: The PL-485-BT converter can be used to connect a PC/Mobile
device to ANY Prolon controller. This example only shows connections to
PL-M2000-XXX and PL-NC2000.
14
REV 6.0 / PL-QCK-MIX-EN
- OR -
RS485
IN PORT
Use this method to connect to a PL-M2000-XXX using the PL-485-BT
converter. NOTE: USB Cable (Type A to Type B) and CAT5e cable are
provided with PL-485-BT converter.
- OR -
PL-M2000-XXX (Unit Controller)
REV 6.0 / PL-QCK-MIX-EN
15