Inputs / Outputs; Operation; Changing The Setpoint; Schedule Override - Prolon NC2000 Quick Start Manual

Digital Thermostat
(PL-T1100)

Inputs / Outputs

DO +
DO -
Digital Output (triac dry contact)
Controlled
AO 0-10v
COM COM load
Analog Output (0-10VDC)

Operation

The T1100 is controlled using the circular touch pad on the bottom half
of the thermostat. The touch pad uses capacitive sensing technology
to detect finger proximity. There are no moving parts to push or rotate.
The T1100 is controlled using simple scrolling, tapping or holding
motions, performed around the circle of the touch pad. The center of
the circle is unused.
Tap here to
go BACK
18
REV 6.0 / PL-QCK-MIX-EN
External 24 VAC
N
External load
Optional
thermistor
10K type3
Analog Input
Scroll clockwise or
counterclockwise
to adjust or navigate
Tap here to
ENTER

Changing the setpoint

Home Screen
Scroll or tap
(any direction)
View current zone
temperature
Tap anywhere
(or simply wait)
Home Screen

Schedule Override

The first, go to the setpoint screen.
67.5
79.5
The moon icon
indicates
unoccupied mode
Scroll clockwise
to override
REV 6.0 / PL-QCK-MIX-EN
Setpoint Screen
Heat SP
Cool SP
Adjust your setpoint
by scrolling clockwise
return to
or counterckwise
The sun icon is
displayed when
overridden
67.5
79.5
OVERRIDE ACTIVE
(Occupied mode)
19