How to Connect a Computer to Prolon Controllers
IP Connection
To Controllers
PL-NC2000 (Network Controller)
Use this method to connect to a PL-NC2000 over an IP Connection.
NOTE: The computer and the PL-NC2000 must be on the same subnet
to communicate. Use a CAT5e cable.
12
REV 6.0 / PL-QCK-MIX-EN
USB Connection
ETHERNET
PORT
Use this method to connect to a PL-NC2000 with a USB cable. NOTE:
Use a Type-A to Type-A USB Cable. (Available only for Windows based
computers.)
To Controllers
PL-NC2000 (Network Controller)
REV 6.0 / PL-QCK-MIX-EN
USB
Port
13