Table of Contents
Advertisement
www.prolon.net
Description
The ProLon PL-M1000 Heatpump controller
is
a
microprocessor-based
designed to operate residential or commercial
heatpump
equipment.
(Proportional-Integral) control loops and acts
as a master when used on a network with PL-
VC1000 zone controllers.
General Behaviour
Although fully programmable, the ProLon M1000 Heatpump controller uses pre-established control
sequences or ''profiles'' to operate specific HVAC equipment with dedicated output functions. These
can be fully optimized to obtain the best results for each type of system. Numerous parameters
enable the modification or fine tuning of the fan, the compressor outputs, the action of the heating
outputs (On-or-Off / pulsed / modulating), the proportional bands, integration times, differentials,
operational ranges, setpoints and a whole range of limits and safeguards. The various programming
options also allow the user to modify the schedule, unoccupied mode settings, morning warm-up and
supply air pre-heating sequences as well as the network demand control strategy best suited for the
building space it is controlling. All these parameters can be accessed by using the ProLon Focus
software or with the ProLon handheld digital interface (PL-HNI).
info@prolon.net
www.prolon.net
HEATPUMP HARDWARE GUIDE
GENERAL INFORMATION
PL-M1000 Heatpump Controller
controller
It
uses
PI
1-877-9PROLON
PL-M1000 SERIES
TEL:(450) 973-7765 FAX: (450) 973-6186
3
Montréal
1989 rue Michelin Laval,
QC H7L 5B7
1-800-461-1381
Advertisement
Table of Contents
