Description Of Parts And Function - Back Panel - Lorex SG21FD3044-161 Instruction Manual

6 DESCRIPTION OF PARTS AND FUNCTION – BACK PANEL
11
POWER
AC
12
1 BNC Camera Inputs - Channel 1-8 camera inputs (for cameras with BNC Video
outputs)
2 6 Pin DIN Camera Inputs - Channel 1-8 Camera inputs (for cameras with 6 Pin
DIN camera outputs).
3 RCA Audio inputs - Channel 1-8 Audio inputs (for cameras with RCA Audio
outputs)
4 Slave A/V Out - Audio/Video Out signal for transmitting to a Slave Monitor or
VCR.
5 Monitor A/V Out - Audio/Video output to another monitor.
6 IDE-SUB - This connector is used to connect an external Slave HDD (NOT
AVAILABLE)
7 ETHERNET Port - Available to live view and recorded data on the HDD through
the Internet or a LAN.
8 Sensor Output (Alarm Out, Warning Out) - These terminals are used to connect
external Alarm Output devices, such as a siren, security light, etc.
9 RS-232C INPUT - Connects to the RS-232C terminal on your computer. For
more information on RS-232C communication, refer to MAIN MENU CONTROL section.
10 Alarm INPUT Terminals - These terminals are used to connect external motion
sensors.
11 MAIN POWER SWITCH - Used to turn the system ON or OFF.
12 AC INPUT – Connects to a Power Plug (AC100-240V, 50/60Hz).
2
CH1 CH3 CH5 CH7
CH2 CH4 CH6 CH8
VIDEO INPUT
CH1 CH3 CH5 CH7
CH2 CH4 CH6 CH8
1
12
10 9
RS-232
+ - + - + - + - + - + - + -
AUDIO INPUT
1 2 3 4
5 6 7 8
3
8 7
ETHERNET
USB
ALARM OUT
WARNING OUT
+ -
MONITOR
SLAVE
OUT OUT
4 5 6