NOTE:
The 4 Pin connection is the DC Power cable, and the wider cable is the standard Hard
Drive IDE type connection
4
Secure the HDD in the Casing (optional)
Use screws and tighten them, positioning the HDD into place. This step is optional, but it
is recommended.
5
Slide the top Cover over the Cartridge Casing
Slide the Cover forward over the Cartridge Case. Ensure it is secured in place over the
release latch.
6
Reinsert the Cartridge Casing into the DVR
Fully insert the Cartridge Case into the DVR.
7
Lock the Cabinet
Lock the cabinet by turning the key clockwise.
33