Lorex SG21FD3044-161 Instruction Manual page 15

13 REW BUTTON
Press this button to begin high-speed reverse playback during the playback.
14 PLAY / PAUSE BUTTON
a) Initiates video Playback.
b) PAUSE : Press this button to pause video in playback.
15 FF BUTTON
Press this button to begin high-speed forward playback during the playback.
16 REC / REC STOP BUTTON
REC: Press this button to start manual recording.
REC STOP: Pressing this button for more than 3 seconds will stop recording.
17 STAND_BY BUTTON
Turns the monitor screen ON/OFF. A red LED indicator light turns ON when the monitor is
in Standby mode. Press the button to turn the power ON.
NOTE: The master power switch for the DVR/Monitor is located on the back of the
unit.
NOTE: To provide longer life to the monitor, turn the Standby switch OFF when not
in use.
18 JOG
Jog dial to the right for forward frame-by-frame playback, or to the left for reverse frame-by-
frame playback.
19 SHUTTLE
You can select the playback speed for both forward and reverse by turning the shuttle to
the left or right.
20 LED indicators - Status of operation.
a) REC: LED will be ON when recording data to the HDD.
b) TIMER: LED will be ON when the TIMER REC is set to ON.
c) PLAY: LED will be ON when playing data that has been stored in the HDD.
d) ALARM: LED will be ON when the ALARM or MOTION function is set to ON.
When the ALARM or MOTION function is ON, the LED will blink as an Alarm is being
triggered.
10