Pan/Tilt Zoom - Lorex SG21FD3044-161 Instruction Manual

21” flat screen crt / dvr observation system with 4 night vision cameras

Hide thumbs Also See for SG21FD3044-161:

Table of Contents

PAN/TILT ZOOM

The DVR/MONITOR is equipped with a built-in Pan/Tilt Zoom feature, which is only available

when used in conjunction with a compatible Pan/Tilt Dome camera.

The Pan/Tilt Zoom feature supports "Pelco D" protocol.

To access and operate the PTZ feature, follow these instructions:

Connect a compatible Pan/Tilt Zoom Dome camera to the CH 1 camera input.

Enter the Pan/Tilt Zoom mode by holding the PAN/TILT key on the

DVR/MONITOR, or press the Pan/Tilt button on the remote control

You will see a contracted screen with a blue border.

Use the Arrow keys to sideways, and ↵ Button to select whether to MOVE and

ZOOM the camera.

If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all

directions. If you selected ZOOM, use the arrow keys to Zoom IN / OUT.

Select and press ↵ on the EXIT option to escape Pan/Tilt mode.

NOTE:

The system automatically exits Pan/Tilt mode after 20 seconds of inactivity.

Refer to the diagram below for an illustration of Pan/Tilt Zoom mode.

MOVE

[CH1 PAN/TILT MODE]

ZOOM

FOCUS

EXIT

Table of Contents