Installing The Hdd - Lorex SG21FD3044-161 Instruction Manual

19

INSTALLING THE HDD

NOTE: The HDD serves the same purpose in the DVR/Monitor as a video cassette does in a
VCR. However, installing the HDD is a bit more complicated. Please follow the next
steps carefully in order to ensure proper installation.
The compartment located on the front panel of the DVR/MONITOR is the removable Cartridge
Casing in which you insert the HDD. The various parts of the Cartridge Casing are labeled for
your reference.
1 Remove the Cartridge Casing from the DVR.
Lift the Handle and pull towards you. The Cartridge Casing will slide out of the DVR.
YOU MAY FIND THAT THE CARTRIDGE CASING IS LOCKED. IN THIS CASE,
SKIP AHEAD TO STEP 8 TO FIND INSTRUCTIONS ON UNLOCKING THE
CABINET, THEN RETURN TO STEP 2.
2 Remove the Cover from the Cartridge Casing.
3 Connect the HDD into the Cartridge Casing
Take the Hard Disk Drive and Connect the two cables from the back of the Cartridge
Casing to the HDD. The cables should be pushed in firmly, but not forcibly.
Cartridge Casing
3 3
a) Unclip the release latch with the word "OPEN" printed beside it
by gently pushing on the latch.
b) Slide the cover off the Cartridge Casing.
32
1. Keyhole
2. LED indicator lights
(Power indicator & HDD Access indicator)
3. Handle
1 1
2 2