Alarm Rec Set; Schedule Rec Set - Lorex SG21FD3044-161 Instruction Manual

a) REC QUALITY : Sets the quality level of recording.
Available settings are : Basic, Normal, High and Best.
NOTE: Higher quality recording consumes more memory on your HDD. Please refer to
RECORDING TIME (IN HOURS) on page 30.
b) REC RESOLUTION
c) REC SPEED : Allows you to set the Images Per Second for recording. Available IPS
settings are: 1, 2, 3, 5, 10, 15, 30 & 60. The speed of 60 IPS is also known as "Real
Time". 1 IPS is the slowest Time Lapse speed; it will allow for the longest recording
durations as it records less information.
d) HDD CLEAR ALL : Press the ↵ button and "MASTER" will appear, then press the ◄
button. Since this function will delete ALL the recorded video on the Hard Drive, you'll
have to confirm that this is what you want to do. The system will prompt "REALLY?".
Select [Y] to confirm the HDD Clear.
e) HDD OVERWRITE : Select [Y] to have the DVR/MONITOR automatically overwrite
previously recorded video in the event of the HDD becoming FULL. If you select "Y" it will
display OVWR (Overwrite) in the on-screen display. If you select "N", the DVR/MONITOR
will terminate recording once it reaches its capacity.
NOTE: HDD Overwrite replaces the earliest recorded video with additional video being recorded.
When the HDD is full and the Overwrite option is enabled, the system will automatically
record over the oldest video that was recorded.
7.9

ALARM REC SET

This submenu allows you to configure the Recording parameters under the Alarm condition.
a) ALARM REC : This setting selects whether or not the DVR/MONITOR will record
automatically when a Motion Detection or a PIR alarm is triggered.
b) PRE ALARM REC : Selects the enable or disable of "PRE ALARM".
NOTE: PRE ALARM saves 6secs of image at 5ips before ALARM or MOTION goes off
under alarm or motion situation. (When ALARM REC mode is on, images are being
stored in HDD.)
c) REC QUALITY : Selects the Recording Quality level for Alarm Recording (from Basic,
Normal, High, or Best).
d) REC SPEED : Sets the speed of Alarm Recording from 60 / 30 / 15 / 10 / 08 / 04 / 02 / 01
IPS.
e) REC DURATION : Selects how long the DVR/MONITOR will automatically record after
an alarm is triggered. Available duration times are: [ 20SEC / 30SEC / 1MIN / 2MIN /
5MIN and CONTIN]. CONTIN refers to Continuous recording.

7.10 SCHEDULE REC SET -

This Submenu allows you to Schedule times in which you're programming the DVR/MONITOR to
record automatically.
a) SCHEDULE REC : Select from the following types of Scheduled recordings:
[DAILY] - Recording will be carried out according to a specified time on a daily schedule.
[OFF] - No schedule.
18