Lorex SG21FD3044-161 Instruction Manual page 13

2 QUAD BUTTON
Pressing this button goes to Quad viewing mode, either Page A (Q1) or Page B (Q2).
3 SEQ BUTTON
Used to automatically sequence between all camera locations in full screen view. Press
SEQ again to stop sequential viewing. Sequence settings are programmable via the Menu.
4 PIP/POP BUTTON
PIP allows you to view two camera locations simultaneously, one being the main channel,
the other being viewed as a sub-picture. Dual PIP can also be selected, which displays two
sub-pictures as illustrated below. To change between Single PIP and Dual PIP, repeatedly
press the PIP button.
POP divides the screen into 4 screens, with the main channel occupying two-thirds of the
screen. Pressing this button will swap the positions of cameras locations (between the
Main and Sub screen) in the POP viewing model. To exit POP mode, press the other
button.
5 MENU BUTTON
Press this button to bring up the Main Menu.
6 VOLUME BUTTON
Increases or Decreases the audio volume.
7 AUDIO SEL BUTTON
In Quad mode, you can select the channel with audio. Pressing this button automatically
changes the audio from channel to channel. An audio microphone symbol will appear in the
corner of a Quad screen to indicate audio is available on a particular channel.
8 TALK BUTTON
SINGLE PIP
MAIN
SUB SUB
SUB
POP
8
DUAL PIP