Table of Contents
Advertisement
Camera Title Setup – Change the title for each camera that appears in the On Screen Display. Use ▲/ ▼buttons to
select channel, ◄ / ►buttons to move positions, and +/- buttons to change the number or
character. Alternatively, press the "Enter" button to disable the camera ID display.
Event List – Brings up a historical record of Video Loss and Alarm occurrences. For more information on
Video Loss and Alarm, refer to page 8.
Video Set – Adjusts the picture Brightness / Contrast / Color by channel. Select Channel 1~4, then adjust the settings.
System Reset – Returns system to factory default settings.
BACK PANEL
DC 12V
500 mA
1
1
1.
POWER INPUT
Connects to the DC 12V Power Adapter (included with the system).
VIDEO IN (Channels 1-4)
2.
Four BNC Video camera inputs, for Channels 1-4. Connect four cameras to these inputs.
3.
VCR IN
Receives video signal from a VCR or DVR.
MONITOR OUT
4.
Transmits video signal to a monitor (a TV or a security monitor) in Full / Quad form – depending on the
setting of the Quad Processor.
5.
QUAD OUT
Transmits video signal to a VCR or DVR in Quad format.
RS232 / ALARM INPUT / EXTERNAL ALARM OUTPUT
6.
Connect PIR Motion Sensors / Magnetic Sensors to this terminal (refer to page 13) to enable Alarms.
Alternatively, connect this terminal to a PC (refer to page 13) and control system functions via a PC.
2
3
VIDEO INPUT
2
VCR
MONITOR
4
IN
OUT
3
4
7
QUAD
ALARM
OUT
5
6
Advertisement
Table of Contents
