Symbols; Designations; Abbreviations - Bosch rexroth M1-16 Series Instruction Manual

8/54 Control blocks for mobile applications | About this documentation
Bosch Rexroth AG, RE 64025-B/2021-08-12
1�3�2 Symbols
The following symbols indicate information that is not safety-relevant but increases
understanding of the documentation.
Table 3: Meaning of symbols
Symbol Meaning
If this information is disregarded, the product cannot be used and/or
operated to its full extent.
▶ Single, independent action
1� Numbered instruction:
The numbers indicate that the actions must be completed in order.
2�
3�
1�3�3 Designations
This documentation uses the following designations:
Table 4: Designations
Designation Meaning
Mono block A control block that has been cast from a single piece. Optionally,
other directional valves can be mounted to extend the functions.
Control block A control block that has been assembled from one or several
in sandwich plate directional valves.
design
Directional valve A control block segment with 1 spool axis; also referred to below as
a "valve section".
Control spool Main spool
Actuation Type of control spool actuation
1�3�4 Abbreviations
This documentation uses the following abbreviations:
Table 5: Abbreviations
Abbreviation Meaning
ATEX EC directive on explosion protection (Atmosphère explosible)
DIN Deutsche Industrie Norm (German Institute for Standardization)
ISO International Organization for Standardization