Disposal - Bosch rexroth M1-16 Series Instruction Manual

44/54 Control blocks for mobile applications | Disposal
Bosch Rexroth AG, RE 64025-B/2021-08-12

12 Disposal

Spring-loaded components!
Risk of injury due to ejected components during disassembly of the valve into its
individual parts!
▶ Loosen screwed-in and spring-loaded components slowly and keep secured
until the compression spring is relieved.
Careless disposal of the control block, the hydraulic fluid and the packaging
material can result in environmental pollution.
For the disposal of the control block, observe the following points:
1� Drain the control block completely.
2� Dispose of the control block and the packaging material in accordance with the
national regulations of your country.
3� Dispose of the hydraulic fluid in accordance with the regulations of your
country.
4� Disassemble the control block into its individual parts and recycle them.
5� For example, separate the parts into:
– Metals
– Electronic waste
– Plastic
CAUTION