Setting Up The Camera - Lorex LNE1001 Instruction Manual

SETTING UP THE CAMERA

Basic setup for your network camera.
NOTE: Pedestal assembly refers to LNE1001 and LNE3003 series
To set up the camera:
1. Attach the stand to the base
2. Attach the mounting bracket to the stand.
3. Attach the camera to the completed pedestal. Use the thumb screws to secure the camera
firmly.
4. Attach the wireless antenna to the back of the camera (LNE3003/LNZ4001 series
Figure 1.0 Assemble the pedestal
Figure 1.2 Attach the antenna to the
camera (LNE3003
8
/ LNZ4001 only )
only .
Figure 1.1 Attach pedestal to the camera
Figure 1.3 Fully assembled camera (from top-right, LNE1001,
LNZ4001, LNE3003)
only
).