Remote Viewing Using A Web Browser - Lorex LNE1001 Instruction Manual

Remote Viewing Using a Web Browser

To access your device remotely from a web browser:
1. In your browser, go to
Click Yes in the security pop-up window.
2. Under My Stuff, click the camera you want to view.
3. Enter you user name and password (by default, admin) to login to your camera.
Figure 8.6 Remote viewing using a Web browser
NOTE: You may need to install QuickTime for the Yoics site. If you have not installed the QuickTime plug-in,
your browser will prompt you to do so now (www.apple.com/quicktime/download).
NOTE: If you have an external (WAN) static IP address or you have registered with the free LOREX DDNS
service, you can configure your router to port-forward the incoming Internet connections to the camera.
Use the static IP address or your customized lorexddns.net URL in the address field of your browser to
access your camera. Yoics registration is not required when using this option. For details on setting up
a FREE Lorex DDNS account, see "Appendix E: Setting Up DDNS Service" on page 83. For details on
port-forwarding your router, see "Appendix D: Router Port Forwarding" on page 82.
ATTENTION: As a security measure, using Yoics remote viewing (PC or mobile) from one
location will disable the option to use the same Yoics ID from a different remote location for
approximately 30 minutes.
NOTE: You can also use MSN's Windows Live Messenger as an alternate remote viewing option. For
details, see "Remote Viewing Using MSN Messenger" on page 30.
ATTENTION: If you want to use Yoics Remote Viewing and port forwarding, you must first
register your camera with Yoics. For more information on port forwarding, see "Appendix D:
Router Port Forwarding" on page 82.
http://lorex.yoics.com and log in using your user name and password.
ATTENTION: You will be able
to view live video for 5~10
minutes then the connection
will drop. To refresh the
connection, click the camera
icon again.
Using Yoics
27