View Live Image; Refresh List Of Devices - Lorex LNE1001 Instruction Manual

Using DigiConsole

View Live Image

NOTE: You must install DigiConsole to your PC in
order to view live video in DigiConsole.
View Live Image displays live video from the IP
device in DigiConsole.
To view live streaming video in DigiConsole:
• Right-click the device and select View Live
Image. It make a few moments for the video
stream to begin.
If you attempt to navigate away from the Find menu
while viewing live video, a dialogue box will ask you
if you want to cancel the video stream (see Figure
11.3).
• Click OK to stop the video stream, or click
Cancel to maintain the video stream while in
a different menu.

Refresh list of devices

Manually refresh the device list if you have
performed firmware updates, added any new
devices, or changed network settings.
To refresh the device list:
• Right-click the device and select Refresh the
list of devices
36
Figure 11.2 Live streaming in DigiConsole
Figure 11.3 Stop live video warning