Events; Motion Events - Lorex LNE1001 Instruction Manual

EVENTS

Use the Events menu to configure options and settings for Motion Events, HTTP Events, PTZ
options, and Alarm input/output.
NOTE: PTZ and alarm input/output is applicable to LNZ4001 Series models
To open the Event menu:
• Click Events in the DigiViewer main window.
Figure 18.0 Events menu (by default, Motion Events menu)

Motion Events

Use the Motion Events menu to configure motion detection and email notification.
To enable motion detection:
1. Under Motion Event Trigger, select Enable Motion Detection.
2. Under Motion Sensing, enter a numeric range for motion sensitivity from 0 (no sensitivity) ~
100 (very high sensitivity). By default, motion sensitivity is set to 90.
3. Click Submit Motion to save your settings.
NOTE: You must enter SMTP information in order to send an email alert. For details, see "Outgoing Email
Server" on page 63.
To enable email alerts:
1. Under E-Mail Notification, select Enable.
Optional
2. : Select Attach graphic image if you want to attach a JPEG to the email.
3. Enter the recipient address in the "To" field; subject and body text are optional.
4. Click Submit Motion.
NOTE: Check the FTP box to send the snapshot image to an FTP server. Enter the filename prefix in the
text field. Your FTP server needs to be setup separately. Enter the FTP server login information in
>
Settings Network Services
on page 64.
48
>
Network Recorder Server
only .
. For details, see "Network Recorder Server"