Hybrid And Sensor Connection Cables - Siemens LDS 6 Operating Instructions Manual

Technical specification

7.2 Hybrid and sensor connection cables

Item
Pressure
Maximum allowable working pressure (MAWP)
Materials of wetted parts
Device variant
Standard
High pressure
7.2 Hybrid and sensor connection cables
General
Configuration hybrid ca‐
ble
Cable sheath
38
Part Component
Wedge window Corpus
module
Window
Screwed joints
Gaskets
Purging tube adap‐ Corpus
tor
Purging tube (op‐
tion)
Screwed joints
Gaskets
Process Interface Corpus
Screwed joints
Gaskets
Process Interface Corpus
Window
Screwed joints
Gaskets
Two optical fibers and two twisted copper wires in one cable for 24 V DC.
Single-mode optical fiber configured at both ends with E2000 angle connec‐
tors. Multimode optical fiber configured at both ends with SMA connectors.
For installations in Ex zones non-intrinsically-safe cables have to be spatially
separated from intrinsically-safe lines
Oil-resistant polyurethane
Specification
Ambient ±50 hPa
16 000 hPa at 20 °C (68 °F) for pressure-resistant
window flange
1050 hPa at 20 °C (68 °F) for standard flange
Materials used
Stainless steel 1.4404
Borosilicate glass
Stainless steel 1.4404 or 1.4401 or
1.4306
FKM, graphite, thread sealant contain‐
ing PTFE
Stainless steel 1.4404
Stainless steel 1.4432
Stainless steel 1.4404, 1.4571
FKM, thread sealant containing PTFE
Stainless steel 1.4404
Stainless steeel 1.4404 or 1.4306 or
1.4401
FKM, graphite, thread sealant contain‐
ing PTFE
Stainless steel 1.4404
Borosilicate glass
Stainless steel 1.4404 or 1.4401 or
1.4306
FFKM, graphite, thread sealant contain‐
ing PTFE
Operating Instructions, 01/2022, A5E01134377-05
LDS 6, Optics Housing CD 6