Siemens LDS 6 Operating Instructions Manual page 21

Align the optics housings in the following steps:
Roughly align the adjustable flange so that the two discs are parallel.
Receiver side
Figure 4-4
Release the receiver lock ring furthest from the process – use the supplied tool – and remove the
receiver optics housing.
Receiver side
Figure 4-5
Fasten the supplied alignment plate. It screws on easily with the help of an O-ring. The alignment
plate is included in the supplied alignment kit, Order No. A5E00253142. Turn the flashlight on
LDS 6, Optics Housing CD 6
Operating Instructions, 01/2022, A5E01134377-05
Remove the receiver optics housing
Mount flash light
Installation guidelines
4.3 Alignment
21