Siemens LDS 6 Operating Instructions Manual page 36

Service and maintenance
6.4 Return procedure
Required forms
• Delivery note
• Return goods delivery note
returngoodsnote)
with the following information:
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
• Decontamination declaration
declarationofdecontamination)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean and
decontaminate the device/replacement part before returning it in order to ensure that all
hollow areas are free from hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts returned without a decontamination declaration will be
cleaned at your expense before further processing.
Note
Return of products with lithium batteries
Lithium batteries are dangerous goods according to the Regulation of Dangerous Goods, UN
3090 and UN 3091.
• Remove lithium batteries prior to shipment.
• If the battery cannot be removed, return the product according to the Regulation of
Dangerous Goods with special transport documentation.
36
(https://www.siemens.com/processinstrumentation/
(https://www.siemens.com/sc/
Operating Instructions, 01/2022, A5E01134377-05
LDS 6, Optics Housing CD 6