Hitachi UX2 Series Basic Operation Manual page 46

Ij printer
Hide thumbs Also See for UX2 Series:
Table of Contents

Advertisement

Chapter 4. Ink and Makeup Replenishment
4.1. Replenishing Ink
This section describes how to replenish ink in this unit. It also provides ink replenishment timing and
precautions.
(1) Overview
● Ink can be refilled when the remaining ink icon is positioned in a range where the cartridge bottle can be
replaced.
● Replenish the ink in the ink reservoir within 60 minutes (*1) after the warning [@Ink Low Warning@]
occurs. If the ink is not refilled, the unit will stop.
(*1) The specification differs depending on the ink type. See the "Handling guidance of each
ink, Chapter 4" for details.
● When the ink is replenished, the warning is automatically reset.
● Ink can be refilled only while the power is ON.
High
* If the icon color is blue, the ink cartridge bottle cannot be replaced.
● If the ink level in the ink cartridge bottle is low, the level of the remaining ink icon may suddenly drop to
the replaceable bottle range. However, you can continue the operation as this is not a problem.
4-2
<Remaining ink icon>
Replaceable
bottle range
Ink low (fault)
Ink low (warning)
Low

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux2Ux2-d160w

Table of Contents