Hitachi UX2 Series Basic Operation Manual page 5

No. Item name
14 Ferrite core
I/O plug
15
10 pins
I/O plug
16
13 pins
I/O plug
17
9 pins
18
Nozzle rubber seal
(*1)
Replenishment port
19
cap
(*1)
(*1) Store these items in a plastic bag, etc., to protect them from dirt and dust.
Chapter 1. Delivered Items and Accessories
Item code
Quantity
No.
When connecting the LAN cable to the
IJ Printer, put one core around the cable
outside the printer and the other through
one loop of the cable inside the printer as
shown below.
2 -
Used to connect the input/output (I/O)
signals. See the Technical Manual "4.
1 -
ELECTRIC SIGNAL CONNECTION"
for details on how to use the plug.
Used to connect the input/output (I/O)
signals. See the Technical Manual "4.
1 -
ELECTRIC SIGNAL CONNECTION"
for details on how to use the plug.
Used to connect the input/output (I/O)
signals. See the Technical Manual "4.
1 -
ELECTRIC SIGNAL CONNECTION"
for details on how to use the plug.
Used when the IJ Printer will not be used
1 - for several days. It is explained in "3.2.3.
Turning Off Main Power Switch".
It is attached to the ink/makeup reservoir
2 - when shipped. Used when the IJ Printer
will not be used for several days.
Remarks
Outside IJ Printer Inside IJ Printer
1-3